Associated equipment 9000 2G series

VOIP radio operating console

• Designed for operating on a network with remote radio devices through a Voice Over IP protocol
• EUROCAE ED-137 compliant
• Transmitters, receivers and transceivers management over up to four VoIP sessions
• Automatic or manual opening of sessions
• 2 Ethernet ports
• Embedded web server for an easy configuration and management
• Optional touch screen panel for configuration and management
• Radio management through SNMP (ED-137)

Redundancy by coupling

CPE9000-2G VHF transmission coupling unit

The CPE9000-2G has been designed to ensure the operation of two VHF multi-channel transmitters in a coupled mode.

The CPE9000-2G supports the ED-137 VoIP.

Mechanical characteristics

• Height : 44 mm (1U)
• Width : 482 mm
• Depth : 460 mm
• Weight : 3 kg 

Environmental characteristics

• Operating temperature :
• -20 °C to +55 °C
• 95 % relative humidity at +40 °C (non-condensing)
• Storage temperature :
• -40 °C to +80 °C

Optional Pcb MIDS11216

• Interfaces: 4 wires RS485, Ethernet (2 links)
• Protocols: JBUS, VOIP (according to ED137-1), SNMP (V1, V2C and V3 according to ED137-4)

CPE9010-2G UHF transmission coupling unit

The CPE9010-2G has been designed to ensure the operation of two UHF multi-channel transmitters in a coupled mode.

The CPE9010-2G supports the ED-137 VoIP.

Mechanical characteristics

• Height : 44 mm (1U)
• Width : 482 mm
• Depth : 460 mm
• Weight : 3 kg

Environmental characteristics

• Operating temperature:
• -20 °C to +55 °C
• 95 % relative humidity at +40 °C (non-condensing)
• Storage temperature:
• -40 °C to +80 °C

Optional Pcb MIDS11216

• Interfaces : 4 wires RS485, Ethernet (2 links)
• Protocols : JBUS, VOIP (according to ED137-1), SNMP (V1, V2C and V3 according to ED137-4)

CPR9000-2G reception coupling unit

The reception coupling device CPR9000-2G has been designed for the simultaneous operation of two receivers.

Mechanical characteristics

• Height : 44 mm (1U)
• Width : 482 mm
• Depth : 500 mm
• Weight : 2.7 kg

Environmental characteristics

• Operating temperature :
• -20 °C to +55 °C
• 95 % relative humidity at +40 °C (non-condensing)
• Storage temperature :
• -30 °C to +80 °C

2 ways RF divider COVU29022 Option Module

Inputs and outputs :

• 50 Ω VSRW < 2
• on BNC connectors type

Insertion loss :

• < 4 dB

Frequency range :

• 100-400 MHz

Insulation between outputs :

• ≥ 20 dB

BNS 9008 MAIN / STAND-BY automatic switching unit

The switching unit BNS9008 is designed to ensure the commutation between two Main and Stand-by transmission or reception equipment.

This switching unit may be :

• MANUAL, from the front panel, or remotely
• AUTOMATIC, when an equipment is faulty.

Mechanical characteristics

• Front panel dimensions : 483 mm x 44.5 mm
• Overall depth (including sockets) : 445 mm (approximately)
• Weight : 2.6 kg

Climatic characteristics

• Operating temperature :
• between -20°C and +55°C
• 95 % relative humidity at 40°C (without condensing)
• Storage temperature :
• -40°C to +80°C

MC9020-2G V/UHF reception multicoupleur

The reception multicoupler MC9020-2G permits, from a single antenna input, to have 16 independent radiofrequency outputs available. Thus, one may couple on a single antenna, 1 to 16 receivers operating in the frequency range of the multicoupler.

Mechanical characteristics

• The multicoupler is a frame with the dimensions of a 1-unit
• high standard 19" rack.
• Height : 44,5 mm (1U)
• Width : 483 mm
• Depth : 500 mm
• Weight : 3.5 kg 

Climatic characteristics

• Operating temperature :
• -20 °C at +55 °C.
• 95 % relative humidity at +40 °C (non-condensing)
• Storage : -40 °C to +80 °C

CONV-VOIP9000 VOIP Gateway

The voice over IP (VoIP) gateway consists in VoIP modules called VOAD that can be inserted into a specific support frame (up to 3 VOAD in a chassis) or individually installed in a rack.

A VOAD module allows interfacing analog systems to IP networks according to the ED-137 standard. The choice of equipment to be interfaced (radios or VCS) is setup by software configuration.

Main Features

• Designed for Analog-to-VoIP conversion
• Can be connected either to analog radios or to analog VCS to provide IP functionalities
• Radio side or VCS side use selection by software command
• EUROCAE ED-137 compliant
• SNMP V1, V2c and V3
• 2 Ethernet ports
• SNMP/JBUS gateway capabilities for TELERAD analog radios

CDSG9000-2G 10MHz CLOCK DISTRIBUTOR synchronized on GNSS

The 10MHz clock distributor includes a "FireFly-IIA" Jackson Labs Technologies, Inc. receiver module.

This high performance receiver can receive up to 50 satellites (GPS, WAAS, EGNOS, MSAS and GALILEO compatible). It uses satellite signals to control an oscillator frequency, a 10MHz OCXO in this case.

Main characteristics

• Rack 19'', 1U
• Receiving up to 50 GNSS channels
• 16 "10MHz" low phase noise outputs, level 0dBm
• 3 "10MHz OUT" low phase noise outputs, level 14dBm
• Led "GPSDO STATUS": indicates the disciplined status of the OCXO
• Remote control / monitoring of the "CDSG9000-2G" by Ethernet TCP/IP link using a JBUS table

Mechanical characteristics

• Height : 44 mm, 1U
• Width : 483 mm
• Overall depth : 432 mm
• Weight : <2,6 kg

Climatic characteristics

• Operating temperature:
• -20 °C to +55 °C
• 95 % HR to +40 °C (non condensing)
• Storage temperature : -40 °C to +80 °C